LargeEquip_Shipping Route To Rm213

The path that the equipment would take to reach the designated area of the psychology building (room 213) would consist of 5 doors/entrances and 4 hallways. The first door encountered would be the external shipping entrance (please see “1DE1”). This door is quite large (H 8”, W 5”10’) as it is designed for such purposes of loading and unloading of large equipment. The car will then travel through a wide hallway (please see 2HAL1) to reach the elevator door. Elevator door is larger then a standard door (H 7”5’, W 3”7’) (please see 3DE2). The interior of the elevator is (H 8”, W 4” and 7” in length) (please see 4HAL2). Then the car will have to travel out of the elevator (please see 5DE3) turning 90 degree into a wide hallway (H 8”, W 9”) (please see 6HAL3). From that hallway, the car will have to pass through the first small door (H 7”3’, W 3”) (please see 7DE4 and 7DE5). After passing the small door the car will travel for about 16 feet in a hallway that is (H 8”, W 4”9’) (please see 8HAL 4). Then finally the car will have to be make a sharp turn to get into the lab door; which is (H 7”4”, W 3”) please see (9DE7, 9DE8) into the designated lab room. This last entry will be the most difficult one as car has to turn left 90 degrees from a hallway of 4’9” in width. Of course you don’t have move in the equipment in the direction perpendicular to the wall/door. This will be constrained by the “thickness” of the equipment.